CAUSES OF BLOCKAGE FAILURE IN POWERFUL CRUSHER

We are a professional Plastic machinery Manufacturer. Today I will share with you the reasons for the blockage of the powerful crusher.

　　The clogging of the powerful crusher is one of the common failures in the use of the crusher. There may be problems in the design of the tool, but it is more caused by improper use and operation.

　　(1) The feeding speed is too fast and the load increases, causing blockage. During the feeding process, you should always pay attention to the large deflection angle of the ammeter pointer. If it exceeds the rated current, it indicates that the motor is overloaded, and the motor will be burned if overloaded for a long time. In this case, the feed door should be reduced or closed immediately, or the feed mode can be changed, and the feed volume can be controlled by increasing the feeder. Due to the high speed of the universal crusher, the large load, and the strong fluctuation of the load. Therefore, the current of the shredder is generally controlled at about 85% of the rated current.

　　(1) The discharging pipeline is not smooth or blocked and the feed is too fast, which will block the air outlet of the universal pulverizer; improper matching with the conveying equipment will cause the discharging pipeline to be blocked when the wind is weakened or there is no wind. After the fault is detected, the conveying equipment that does not match at the delivery port should be cleared first, and the feed volume should be adjusted to make the equipment operate normally.

　　(3) Hammer fragments, aging, closed or broken screen holes, and high water content of the crushed materials will block the universal crusher. The broken and severely aged hammers should be updated regularly to keep the crusher in good working condition and check the screen regularly. This can improve the production efficiency and prevent the universal crusher from clogging and enhance the reliability of the crusher.

　　The above is the analysis of several reasons and corresponding solutions for the blockage of the powerful crusher. I hope it will be helpful to everyone.

　　We not only have Powerful crusher, but also many other products, such as Dustless feeder, etc. Welcome to visit our website!

CAUSES OF BLOCKAGE FAILURE IN POWERFUL CRUSHER